Category: vape pod

Uwell Caliburn G kit review – perfect complement to novice

Post author By bvadmin
Post date December 10, 2020
No Comments on Uwell Caliburn G kit review – perfect complement to novice

Uwell Caliburn G pod, which is a compact open pod system designed for free alkali and nicotine salt e-liquid. It has a lightweight aluminum chassis, 690mAh battery, exhaust-type ignition, replaceable pods and coils. This kit is the perfect complement to novice or experienced vaper.

Features
The Uwell Caliburn G portable pod system has a lightweight aluminum chassis, which is as light as a feather compared to zinc alloy. Tightly packed in the device is a 690mAh internal battery, which can be charged through the USB Type-C port located at the bottom of the device.

Cartridge
Each Caliburn G refillable pod has a press-fit connection and fits firmly into the shell. The housing that holds the pods in place has side viewing windows, allowing users to check their juice level at will without removing the pods themselves.

Coil
As far as fragrance production is concerned, Caliburn G coils use a mesh coil configuration to create complex and detailed fragrances. Simply remove the top cigarette holder and fill it through the “pressure and fill” port to easily complete the refilling of the container.

Summary
Not only can it be launched by pulling the activated sensor, but the user can use the on/off switch to get a more tactile e-cigarette experience. The maximum power output of Uwell Caliburn G is 15W. Use with Uwell Caliburn G replacement pods to provide an excellent e-cigarette experience.

Other kits related we recommend:
buy gaur 21
buy uwell caliburn g replacement coils

Tags Caliburn G kit, Uwell Caliburn G, Uwell Caliburn G kit

Uwell vape pod

Uwell KOKO Prime Pod Kit – Caliburn G Coil Series and Pods

Post author By bvadmin
Post date December 3, 2020
No Comments on Uwell KOKO Prime Pod Kit – Caliburn G Coil Series and Pods

The KOKO Prime Pod device is Uwell’s highly anticipated vape kit with a 690mAh integrated battery that can be used with the Caliburn G Coil series and Pods. Each pod can hold 2ml of e-liquid, which is heated to an ideal state by a 0.8 ohm mesh coil and a new 1.0 ohm FeCrAl coil.

SPECIFICATION
Material: PCTG, PC+ABS
Size: 68mm × 45.6mm × 16mm
E-liquid Capacity: 2ml
Filling Type: Top Filling
Maximum Wattage:15W
Coil Resistance: 1 Ω / UN2 Meshed-H 0.8 Ω (Sold Separately)
Battery Capacity: 690mAh

The latter is specifically used for MTL atomization and flavor enhancement. Use Type-C charging to enjoy faster charging speed and longer battery life, and use decorative magnetic plates to customize your KOKO pod device, which has a variety of color options.

Other pod system kits you may like:
eleaf istick t80 near me
obs pluck near me

SMOK vape pod

SMOK POZZ X Pods review – excellent comfort, perfect flavor

Post author By bvadmin
Post date August 18, 2020
No Comments on SMOK POZZ X Pods review – excellent comfort, perfect flavor

Hello, friends. Use the 3-piece SMOK POZZ X Pods, ready to use your favorite Pod Mod at any time. Whether you need to replace the original POZZ X pod or need an additional pod just in case, these are essential accessories for the SMOK POZZ X pod system.

Specification
97.3 x 33.66 x 22mm
97g
5 – 40W Output Range
1400mAh Built-In Battery
2ml Refillable Pods
Supports MTL & DTL Vaping
Compatible with High VG & High PG E-Liquid

POZZ X RPM pods can be used with SMOK RPM coils, and can hold 4.5ml of large amounts of juice. The pod has an air flow adjustment ring, a side filling port with a rubber plug (to prevent leakage), and a threadless coil installation.

Smok Pozz X has a compact color 0.96-inch display that allows you to adjust the power in the range of 1-40w, and provides power lock and a series of safety features and protections.

Pozz X also has a unique three-way airflow system, and further helps through the adjustable airflow mechanism of the pod itself. Pozz X pods are compatible with all of Smok’s industry-leading RPM40 coils, and they provide countless ways to customize the vape to your liking.

Pozz X has a stylish design, excellent comfort, perfect flavor and a long-lasting 1400mAh battery. It is an amazing vape device that can be used everywhere.

Fill the POZZ X container with different flavors, or carry an additional filling container so that you can change the cartridge anytime, anywhere-no need to carry a full bottle of e-liquid. Now on sale at Vapesourcing.

Other pod you may prefer:
argus air voopoo review
ryse bar disposable review

Tags POZZ X, SMOK POZZ X, SMOK POZZ X kit

Teslacigs vape pod

Teslacigs Invader GT Kit – became a hearth, but did not change yourself

Post author By bvadmin
Post date March 25, 2020
No Comments on Teslacigs Invader GT Kit – became a hearth, but did not change yourself

Well, in the end, I prepared for you one of the most interesting new products from the beginning of 2020. The legendary insider from Teslacigs returns in the guise of a hearth, but it did not betray himself, and remained a varivolt. What else to add – get acquainted with Teslacigs Invader GT Kit.

buy Teslacigs Invader GT 50W Mod Pod Kit

Parameters
Dimensions: 68 x 43 x 19.1mm
Weight: 110g
Case material: metal + plastic
Power: built-in 1200mAh
Cartridge capacity: 3.0ml
Evaporator resistance: 0.2 / 0.3 / 0.6 / 0.8Ω, RBA
Output power: 7 – 50W
Voltage range: 3.2 – 4.2V
Operating mode: POWER
Protection: against low / high resistance, from overheating, from short circuit, from overcharging / overdischarge
Connector type: magnetic
Screen / diagonal: no

As you managed to notice, our eminent Teslacigs retained his unconditionally recognizable appearance, this will definitely benefit him. Moreover, this applies to both the outlines of the case and the decor of the panels.

Airflow adjustment is present, it is executed in the manner of aegis boost – a rotary plate. Moreover, the air intake is upper, which certainly promises the desired impenetrability. We turn to the sub mod controls. The control panel is crowned by an LED indicator of the battery charge level, which serves as a reference to a famous ancestor. Below you can see not a small fire button.

Therefore, we can state that the insider, as he was a brick, remained so to them. By the way, it is also worth noting the small dimensions of the device. Although they are given, probably without taking into account the installed cartridge with drip tips.

Replaceable cartridge of good capacity, will refuel on the side. Still, you will have to remove it from the box mod for this procedure. A huge number of replaceable evaporators are offered, plus there is a serviced base. But just which of them will be in the kit remains a mystery.

Other Mod Pod Kit you may prefer:
RPM80 Pro Pod Mod Kit

Tags Invader GT Kit, Teslacigs Invader GT, Teslacigs Invader GT Kit

vape pod

Want To Find New Vape Pods? Here Are Eleaf Elven And Innokin DV

Post author By bvadmin
Post date January 9, 2019
No Comments on Want To Find New Vape Pods? Here Are Eleaf Elven And Innokin DV

Hey guys, today I want to show you two new vape pods for sale-Eleaf Elven and Innokin DV. What’re their features and which one you will prefer? If you are interested just go to read my article!

First, let’s come to see what’s the Eleaf Elven Kit looks like?

Eleaf Elven Kit color options: Black, Red, Gold, and Silver.

The Eleaf Elven is a new pod mod from Eleaf, the battery part of the device has a 360mAh capacity and there are no buttons or adjustments, simply inhale and the air sensor triggers the device to fire.

This is a refillable pod and you remove it from the battery and pull out the plug on the side to refill. There is also a slot in the battery to enable you to see the e-liquid level remaining in the pod. Inside the Eleaf Elven is a 1.6ohm coil and the pod will hold 1.6ml of E-liquid.

Then let me show a picture of Innokin DV Kit

Innokin DV color options: Black, White, and Silver

The Innokin DV is a new pod mod system with a strange looking design! The big selling point about the new DV device is that the pod (where the liquid and heating element lives) has the new Plex3D coils installed. Plex3D is having a 3D profile this gives more surface area to aid vaporization of the e-liquid. The pod is refillable and will hold 2.8ml of e-liquid.

Thankfully there is also a lovely battery indicator light to tell you of the battery capacity remaining and also a light to inform of the power setting currently in use.

looking at the Eleaf website the Eleaf Elven appears to be thin and lightweight pod mod, designed to be ultra portable, easy to use and ideal for high Nicotine or Nic Salt vapers. And also Innokin DV is also a lovely pod kit deserve we have a try too!

>>More Vaping Products and News Just Go Vapesourcing vape cheap shop.